[INCH-POUND]
A-A-2963
December 11, 1995
SUPERSEDING
MIL-S-4461
August 26, 1970
COMMERCIAL ITEM DESCRIPTION
SEALING MACHINES, HEAT: HOT JAW AND CONDITIONS
1. SCOPE
1.1 Scope. This commercial item description covers sealing machines intended for sealing thermoplastic (unsupported) and barrier (supported) materials.
2. CLASSIFICATION
2.1 Classification. The sealing machines shall be of the following type, class, and style, as specified (see 7.3).
Type I – Jaw sealing machines
Class A – Foot operated, 8-inch (203 mm) long, 1/4-inch (635 mm) wide jaws for unsupported material with both jaws heated
Class C – Motor operated, 12 (305 mm) to 14-inch (356 mm) long, 3/4-inch (19.0 mm) wide jaws for supported material with both jaws heated
Type II – Continuous sealing machines
Class A – For supported material
Style 2 – Floor mounted, 3/4-inch (19.0 mm) sealing bar
Style 3 – Portable, without motor, 1-inch (25.4 mm) sealing bar
Style 4 – Portable with motor, 3/4-inch (19.0 mm) sealing bar
Class B – For unsupported material
Style 2 – Floor mounted, 1/2-inch (12.7 mm) sealing bar
Beneficial comments, recommendations, additions, deletions, clarification, etc. and any data which may improve this document should be sent to: General Services Administration, Engineering Group (7FXEE), 819 Taylor St., Fort Worth, TX 76102. |
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business